|
 |
|
We have a variety of performance, cosmetic, & ergonomic options for you to choose from. |
|
|
|
|
|
|
|
ACCURACY OPTIONS |
Accuracy is a necessity in a good pistol. We at Novak's strive and pride ourselves on super accurate pistols. We only use quality barrels and custom made bushings. Our super accurate barrels are from Kart and Bar-Sto. Our Kart barrels are made of carbon steel and we use Bar-Sto barrels when stainless steel is needed.
|
| |
Supply & Fit Match Barrel |
$295 |
| |
Fit Slide to Frame |
$250 |
| |
Crown Barrel |
$45 |
| |
Supply & Fit Novak Match Bushing |
$65 |
| |
Supply & Fit Bushing Kit (Officer's) |
$175 |
| |
Supply & Fit Ramped Barrel on Cut Frame |
$325 |
| |
*Supply & Fit Ramped Barrel on Uncut Frame |
$425 |
| |
* We DO NOT Recommend Ramped Barrels on Single Stacked Pistols |
|
|
| |
Return to TOP
RELIABILITY OPTIONS |
We at Novak are known to make some of the most reliable, as well as accurate, pistols in the pistol industry. Some of you think a match barrel is not as reliable as a standard barrel. But this is far from the truth. With Novak's you can have an accurate and reliable pistol. There is nothing more aggravating than a pistol that won't function. Again we only use quality parts, if you send in sub-standard parts we will return them to you and use quality parts.
|
| |
Throat Barrel & Polish Feed Ramp |
$75 |
| |
Adjust & Fit Extractor |
$30 |
| |
Supply & Fit Extractor |
$65 |
| |
Supply & Fit Ejector |
$45 |
| |
Supply & Install Plunger Tube Housing |
$50 |
| |
Solder Plunger Tube Housing |
$75 |
| |
Supply & Install Rebuild Kit (Pins & Springs) |
$55 |
| |
Supply & Install Short Recoil Guide System (Spring, Guide, & Plug) |
$45 |
| |
Supply & Install Recoil Spring |
$12.50 |
| |
Supply & Install Firing Pin Spring |
$9 |
| |
*Reliability Package |
$145 |
| |
*(Includes throat barrel, polish feed ramp, check/adjust extractor, check chamber & breech face dimensions, test fire for functions with Factory ammo.) |
|
|
Return to TOP
PERFORMANCE OPTIONS |
A Novak custom pistol will enhance your shooting ability. From the world famous sights to the fine accuracy and clean break of the trigger pull to a pistol that works when you need it the most (every shot). With smooth lines of our carry bevel package, it won't hang up on your clothing or destroy your finely detailed "Milt Sparks" holster.
|
| |
Carry Bevel Treatment |
$125 |
| |
Bevel Magazine Well |
$75 |
| |
Lower Ejection Port |
$75 |
| |
Scallop Rear of Ejection Port |
$45 |
| |
Bevel Slide Stop & Dimple for Positive Function |
$25 |
| |
Supply & Install Slide Stop |
$65 |
| |
Supply & Install Extended Mag Catch |
$45 |
| |
Supply & Fit S&A Mag Funnel (Frame Bevel Blending Required) |
$175 |
| |
Supply & Fit S&A Mag Funnel (No Bevel Frame Blending Required) |
$110 |
| |
Supply & Install Titanium Firing Pin |
$35 |
| |
Supply & Fit Extended Grip Safety |
$125 |
| |
Supply & Fit Ambi Tac or Wide Thumb Safety |
$125 |
| |
Supply & Fit Tactical or Wide Strong Side Thumb Safety |
$95 |
|
| |
Trigger Work
(Trigger Job Pull Weight 4 to 5+ lbs. Only) |
|
| |
Supply & Fit Aluminum Match Trigger Only (Long or Short) |
$75 |
| |
*Trigger Job, 70 or 80 series w/ Novak Hammer Kit (Cmdr or Delta Style) |
$185 |
| |
Trigger Job, 70 Series (Labor Only - parts not included) |
$125 |
| |
Trigger Job, 80 & 90 Series (Labor Only - parts not included) |
$140 |
| |
|
|
| |
* Highly Recommended - Tool Steel Hammer, Sear, & Disconnector w/ Trigger Job |
|
| |
*Many of the options listed may require that your pistol be refinished.
Please check with us if you have any questions. |
|
|
| |
Return to TOP
DETAILING OPTIONS |
We pride ourselves at Novak's on the detailing of our pistols. We hand bevel edges that need to be smoothed - leaving the existing lines of the pistol - instead of distorting the traditional look of your fine pistol with buffing wheels. Our Novak's sights are the finest, this is the original Novak sight not a cheap copy made in some foreign country with molds and poor sight picture.
|
| |
Checkering & Hand Matting |
|
| |
Checker Front Strap 20×20, 25×25, 30x30 Lpi Blue, High cut |
$285 |
| |
Checker Front Strap 20×20, 25×25, 30x30 Lpi Stainless, High cut |
$295 |
| |
Supply & Install Checkered Mainspring Housing |
$95 |
| |
Matte Top of Slide with Milled Border |
$225 |
| |
Matte Front Strap (single column) |
$125 |
| |
Matte Rear of Slide |
$50 |
| |
Matte Stock Screws |
$20 |
| |
Matte Mainspring Housing |
$50 |
| |
Matte Front Strap (double column) |
$175 |
| |
Matte Trigger Face |
$75 |
| |
Matte Memory Pad On Grip Safety |
$35 |
| |
|
|
| |
Grasping Grooves on Front of Slide |
$95 |
| |
High Cut Frame |
$125 |
| |
Fair in Frame Lines |
$100 |
| |
Serrate Top of Slide |
$145 |
| |
Remove Sharp Corners on Front of Magwell |
$25 |
| |
Polish Sides of Slide |
$100 |
| |
Polish Sides of Frame |
$175 |
| |
Supply & Install New Grip Screws & Bushings |
$45 |
| |
1911 Grips - * Please see Grips Sections on this Web Site* |
|
| |
*Many of the options listed may require that your pistol be refinished. Please check with us if you have any questions. |
|
|
Return to TOP
FINISHING |
Novak's will supply you with any finish you prefer for your custom handgun. Our recommended finish is a standard in-house bead blast and blued finish, which is a dull black. All aluminum frames and accessories MUST be hard anodized before any coatings can be applied, the prices below for the aluminum frames have the anodizing included. All of our finishes from deep black blue to hard chrome or black T teflon will give you the proud ownership you deserve. At Novak's a good looking pistol is just as important as a good reliable and accurate pistol.
|
| |
Bead Blast & Blue Slide Only |
$85 |
| |
Bead Blast & Blue Frame Only |
$85 |
| |
Bead Blast & Blue Entire Pistol |
$145 |
| |
Bead Blast Stainless Slide Only |
$55 |
| |
Bead Blast Stainless Frame Only |
$65 |
| |
Bead Blast Entire Stainless Pistol |
$95 |
| |
Parkerizing Slide Only |
$95 |
| |
Parkerizing Frame Only |
$95 |
| |
Parkerizing Entire Pistol |
$175 |
| |
Anodize Aluminum Frame |
$175 |
| |
Hard Chrome Entire Pistol |
$ POR |
| |
Black T - Polymer |
$350 |
| |
Black T - Aluminum Frames |
$450 |
| |
Green T - Polymer |
$350 |
| |
Green T - Aluminum Frames |
$450 |
| |
**For Other Custom Finishes Please Call for Availability** |
|
| |
|
|
|
Return to TOP
Novak "ANSWER®" Installation Package |
** For Guns Not Receiving Novak Gunsmithing Packages Only**
|
| |
Novak "ANSWER®" One Piece Back Strap
Novak Hammer Kit (Delta or Cmdr Style Hammer)
Convert Series 80 to Series 70 Style Fire Control
Titanium Firing Pin
Extra Power Firing Pin Spring
Test Fire for Function
Refinish Lower
Bead Blast and Blue
Bead Blast Stainless
Anodize Black or Silver Aluminum |
|
| |
|
|
| |
**Novak "ANSWER®" Available in Different Variations - Please Call for Details** |
|
| |
**Entire Pistol Needed for Installation** |
|
| |
|
|
| |
Steel Guns - $ 730.00 + Shipping |
|
| |
Stainless Guns - $ 715.00 + Shipping |
|
| |
Aluminum Frame Guns - $ 825.00 + Shipping |
|
|
Return to TOP
Novak "ANSWER®" Elite Package Upgrade |
**For Adding the "ANSWER®" to Novak Gunsmithing Packages Only**
|
| |
Novak "ANSWER®" One Piece Back Strap
Convert Series 80 to Series 70 Style Fire Control
Titanium Firing Pin
Extra Power Firing Pin Spring |
|
| |
|
|
| |
**Novak "ANSWER®" Available in Different Variations - Please Call for Details** |
|
| |
|
|
| |
Novak Function & Reliability Package and Novak Enhancement Package add $610.00 (includes the Novak Hammer Kit Which Must Be Installed) |
|
| |
|
|
| |
Novak Personal Defense Package and Carry Duty Package add $ 500.00 |
|
| |
|
|
| |
All Other Packages Add $ 450.00 |
|
| |
|
|
|
Return to TOP
| |
Due to outside condition, unfortunately, the Staff at Novak's cannot guarantee timeframe for any of the specialty finishes. |
|
|
|
|
|
All our sights are made in United States of America.